collapse
lumia510
alto-800
Bitfenix Outlaw
samsung-ram
corsair-ssd
FRONIX STAR


Topic: Samsung NP300E Laptop review  (Read 7844 times)

Offline rajan1311

  • Premium Member
  • *
  • Liked: 611
  • Posts: 7,960
  • Location: Bangalore
  • Member Since: Dec 2008
  • got some awesome new free stuff :)
Samsung NP300E5Z-A0N Laptop review


Introduction:

Samsung know for its android phones,has been in the laptop market for some time now. Their laptops generally are value for money and have good configurations for the price. They still are not as popular as Dell or HP, but I still went for one. This laptop is based on the 2nd gen pentium dual core and comes with 2GB of RAM. I did however, got it upgraded to 4GB DDR3 RAM. More on performance later on.

The Package:

The box it came in was oddly large, very wide. Once I opened it, came to know why. It comes with a laptop bag inside the box. Quality is pretty decent, very usable bag but nothing premium. The rest of the package was very standard. The laptop was well secured between 2 pieces of foam padding.Then you get a battery pack,charger and the installation disc.




Design and Specifications:

Here are the specifications of this laptop:

  • 2nd Gen Intel Pentium Dual core B950 (dual core,2.1GHz)
  • 4GB(2x2) DDR3 1333Mhz RAM
  • 320GB HDD
  • 15.6" LED Display (1366x768 pixels)
  • 6 cell battery
  • Free DOS


The laptop has a dual color finish. Its got a grey textured surface with dark blue side as well. Not a huge fan of its looks, but its ok, nice to see something different. The surface has a "line" texture, it looks fine, you should not have a very dirty looking laptop as its easy to clean. However, this surface is prone to scratches and with a slight sharp object, it can leave its mark easily.




On the sides you have 2 display options,the older D-sub and the newer HDMI output. You also have the standard USB ports (3 in total),SD card slot,headphone and mic jack.






When you open it up, you see the lovely keyboard. I always liked these kinds, not too sure if they a particular name. I did some bit of typing and it felt fine.The power button has a nice LED around it and it felt firm while pressing. The laptop boots up quick and is not very noisy, but it did get a bit warm at the bottom but should be usable even on your lap. The speakers are pretty good, sufficiently loud and look good as well.





The monitor looks good, its got a 15.6" screen and is not very reflective,which is a good thing. Its got a resolution of 1366x768 pixels, which is pretty standard for a laptop at this budget.





Performance and Benchmarks:

So lets see how this laptop performs. You can compare it to the previous gen pentium dual core system since we had earlier reviewed the Asus X42F with very similar specifications.You can find that review here:
Asus X42F laptop review - Tech Forum India

Here is the windows experience index score, the Asus X42F scored a 4.5 in this with graphics being the lowest. So from this I did expect to see a slight improvement in gaming benchmarks.


We also saw some minor gains in super pi 1M. This shows that the processor should be slightly faster than the older generation in single threaded apps.


Gaming Benchmarks:


Well due to the shortage of time, I just ran 1 test. I played Counter Strike Source and used the inbuilt benchmark for testing. All settings were set to highest. I ran 2 instances, with different resolutions. This was done so that it matches the exact settings we ran on the Asus machine as well as highest resolution on this laptop.

All max settings(1280x720 pixel resolution,same settings on the Asus machine) - 59.43 fps.
All max settings(1366x768 pixel resolution) - 53.19 fps.

So we can see a pretty noticeable improvement over the previous gen chip. Do take into consideration of the fact that the RAM on this machine is clocked at 1333Mhz Vs 1066Mhz on the Asus. This would have improved the overall performance of the machine.

Battery Life:

I ran a HD video in loop, maxed out brightness and speaker volume. The wifi was kept on with a constant internet connection. The battery life turned out to be pretty good. I got more than 2.5hrs of battery life. You can easily extend this by reducing the brightness and other power settings.

Conclusion :

Well this was my first samsung laptop and had a good experience using it. The performance was more than sufficient for day to day tasks and it can do it a bit of gaming as well. I did get an additional 2GB RAM(to make it a total of 4GB) which I think is always a good idea since RAM is pretty cheap these days. The laptop cost me Rs22,500 including the extra RAM. Its a pretty good deal, you might get for slightly cheaper,but even then its very VFM. I would give it an 8/10. The laptop performs very well, but It loses out slightly in the looks department and runs a bit warm.
« Last Edit: June 29, 2012, 03:20:28 PM by rajan1311 »
Intel Core i5 2500k | ASRock Z77E-ITX | Samsung 30nm Green RAM @ 2133MHz | HD 4850 | Corsair 550VX | SVG Tech HOC 40 | Bitfenix Prodigy

catch me at : www.techverdict.com

Offline nandeeshms

  • Reviewer [TFI]
  • *
  • Liked: 50
  • Posts: 846
  • Location: Bangalore
  • Member Since: May 2010
  • It begins by taking the first step
Dude this is the civil PO lappy right??.....heats up real quick man!!!!
Phenom II X4 925 2.8Ghz|MSI 785GM-E51|2GB DDR3 1333 MHz Transcend|ATI Radeon HD 5670 1 GB|500+80 GB SATA HDD|FSP SAGA II 350|Creative SBS A300|

"There's only one guy who's not afraid to die; that's a guy who's already dead." - Charlie Storm

Offline rajan1311

  • Premium Member
  • *
  • Liked: 611
  • Posts: 7,960
  • Location: Bangalore
  • Member Since: Dec 2008
  • got some awesome new free stuff :)
Dude this is the civil PO lappy right??.....heats up real quick man!!!!

yup...i have mentioned that as well...
Intel Core i5 2500k | ASRock Z77E-ITX | Samsung 30nm Green RAM @ 2133MHz | HD 4850 | Corsair 550VX | SVG Tech HOC 40 | Bitfenix Prodigy

catch me at : www.techverdict.com

Offline Tenida

  • Reviewer [TFI]
  • *
  • Liked: 448
  • Posts: 1,168
  • Location: Calcutta
  • Member Since: Nov 2011
  • Nothing is impossible
Dude this is the civil PO lappy right??.....heats up real quick man!!!!
Whats Civil PO lappy?? :idiot:

Offline rajan1311

  • Premium Member
  • *
  • Liked: 611
  • Posts: 7,960
  • Location: Bangalore
  • Member Since: Dec 2008
  • got some awesome new free stuff :)
Intel Core i5 2500k | ASRock Z77E-ITX | Samsung 30nm Green RAM @ 2133MHz | HD 4850 | Corsair 550VX | SVG Tech HOC 40 | Bitfenix Prodigy

catch me at : www.techverdict.com

Offline Tenida

  • Reviewer [TFI]
  • *
  • Liked: 448
  • Posts: 1,168
  • Location: Calcutta
  • Member Since: Nov 2011
  • Nothing is impossible

 

.

* What's Happening ?

backup made with wd smartware from win xp restorable on win 7 by shrutithakur
[Yesterday at 07:18:01 AM]


Encode Blu-ray movies playback on Mac Mini HTPC with PLEX by JeanLiu
[Yesterday at 05:45:57 AM]


Backup Disney Blu-ray Disc to Samsung Series Tablet and Phones by JeanLiu
[Yesterday at 05:45:16 AM]


Enjoy Music DVDs on iPad Mini 3 for your Entertainment by JeanLiu
[Yesterday at 05:44:21 AM]


Remove DRM from iTunes movies on Windows 7/Vista/XP/8/8.1 by JeanLiu
[Yesterday at 05:42:51 AM]


Christmas Freebie-MacX Video Converter Pro Giveaway (100% Off) by Kerins
[December 17, 2014, 09:40:51 AM]


Fronix Star Tablet aka ployer momo9III Review by Monumentov
[December 17, 2014, 08:56:53 AM]


Pavtube Video Converter 4.6.1 Review and Download by ujinwang3
[December 17, 2014, 08:25:04 AM]


FCP X 10.1.3 not recognizing Canon MXF footage? by ujinwang3
[December 17, 2014, 08:16:05 AM]


external hdd problem by vishal51
[December 17, 2014, 06:23:15 AM]


What happend to Hard Disk prices? by LykanthricAura
[December 14, 2014, 05:39:00 AM]


WinFF Alternative for Mac: Convert Any Video/Audio Files on Mac by ujinwang3
[December 13, 2014, 01:49:05 PM]


View JVC GY-HM650U MXF/MOV/AVCHD/MP4 files on PC/Mac by ujinwang3
[December 13, 2014, 01:39:23 PM]


Import AVCHD clips from a Memory Card to FCP X by ujinwang3
[December 11, 2014, 03:19:00 AM]


How do I import MXF files to Final Cut Pro X? by ujinwang3
[December 11, 2014, 03:17:56 AM]


MP4 to FCP 7 workflow: Transcode MP4 for FCP 7 by ujinwang3
[December 11, 2014, 03:17:27 AM]

  • Which is the best DTH provider
  • View Topic
.